Huawei P30 firmware ELE-L29-10.0.0.190

ELE-L29-10.0.0.190 C432 Android 10 ✓ ZIP doğrulandı

Bu dosya hakkında

Verified firmware file for P30. Browse the ZIP contents below and review the attached guides before flashing. This is a demo entry; replace it with your production archive.

Dosya ayrıntıları

Model: P30 (ELE-L29)
Sürüm: ELE-L29-10.0.0.190
Bölge: C432 — Huawei Europe
Android: 10
Derleme tarihi: 2025-11-10
Dosya boyutu: 645 B
Downloads: 0
Views: 1

Özellikler

Firmware type: Full firmware
Security patch: 2025-11-10
Bölge: C432 — Huawei Europe
Android: 10
Derleme tarihi: 2025-11-10

ZIP içeriği

4 öğe · 3.6 KB açılmış boyut

AdBoyut

firmware4 KB
- AP_ELE-L29-10.0.0.190.tar.md52 KB
odin2 KB
- CP_ELE-L29-10.0.0.190.tar.md51 KB
pit1 KB
- P30.pit513 B
README.txt108 B

Kılavuzlar ve talimatlar

How to flash Samsung firmware with Odin

1. Install the Samsung USB drivers.
2. Download the firmware ZIP and extract the .tar.md5 files.
3. Open Odin and load BL, AP, CP and CSC files.
4. Boot the phone into Download Mode and connect USB.
5. Wait for the ID:COM port to appear, then press Start.
6. Do not unplug until Odin reports PASS and the phone reboots.

Always back up user data before flashing.

How to remove FRP safely

1. Verify device ownership and repair authorization.
2. Use the FRP reset file matching the exact model and region.
3. Follow the file-specific steps and keep the device online if required.
4. After the reset, complete initial setup and test all functions.

Only use these files for lawful repairs with the owner's consent.

İlgili dosyalar

Huawei · Test Huawei Device 10